We sell two types of sanitary containers
CTM01 & CTM03Sanitary containers for biological samples
We are pioneers in the commercialization of approved transport biological sample containers.
Our containers comply with the necessary regulations for use in hospitals, clinics and laboratories.
CTM01
Specific for the transport of Category A samples.
This category, includes the set of substances with pathogenic agents, that can cause permanent damage or can endanger life, if exposure occurs.
The CTM01 Transport Container for Biological Samples is composed, in accordance with the OMS recommendations, of two differentiated containers that, concentrically, are housed one inside the other, plus a very resistant compact cardboard mandrel, that is housed in the inside the secondary container.
Container CTM01 is indicated for the transport of all types of Infectious Biological Samples of those cataloged as Type 6.2.
Complies with Packing Instructions P620 and P650.
It can be used for both CATEGORY A (UN 2814) and CATEGORY B (UN 3373) infectious samples.
OUTER PACKAGING | INNER PACKAGING | |
Material | Compact cardboard cylinder with an expanded polystyrene layer adapted to its inner wall. | Compact cardboard cylinder with embedded metal bottom. |
Empty weight | 73 g | 35 g |
Plastic cap weight | 25 g | 9 g |
External diameter | 99 mm | 67 mm |
Total height | 170 mm (capless); 172 (with cap) | 148 mm (capless); 149 (with cap) |
Cobb1800 | 151,4 g/m2 | |
Clasp type | Mobile lid on the upper part of the cylinder, made of rigid plastic and press-fitted to the body of the container, without a seal. | Mobile cover on the upper part of the cylinder, made of rigid plastic and snap-fitted to the cylinder body, without a seal. |
Mandril | Made of compact cardboard with high resistance to compression. |
Primary Containers | The packaging can contain an indeterminate number of primary containers depending on the type of container and size to be used (test tubes, flasks, etc.) |
Materials to pack |
The CTM01 Container is indicated for the transport of all kinds of Infectious Biological Samples of those cataloged as Type 6.2. Complies with Packing Instructions P620 and P650. It can be used for both CATEGORY A (UN 2814) and CATEGORY B (UN 3373) infectious samples. |
Other considerations |
BAR CODE: 8435104100103 CEE MARKING: Does not have. It is a logistic and non-sanitary product, therefore it does not require this marking. |
Present | The CTM01 Containers are served in cardboard boxes of 50 units / box (minimum order). |
Container types
CTM01 sanitary container
Specific for the transport of Category A samples. This category encompasses the set of substances with pathogenic agents, that can cause permanent damage, or can endanger life, if exposure occurs.
CTM03 sanitary container
For the transport of Category B samples. This category includes those biological materials, that do not meet the requirements to be part of Category A, previously described.
CTM03
This container is specific for the transport of Category B samples.
This category, includes those biological materials that do not meet the requirements to be part of Category A, previously described.
The CTM03 Biological Samples Transport Container is composed, in accordance with the OMS recommendations, of two differentiated containers that, concentrically, are housed one inside the other.
Access the technical sheet to observe its structure and composition in detail.
The CTM03 Container is indicated for the transport of Category B Infectious Substances (UN 3373).
Meets P650 Packing Instructions.
OUTER PACKAGING | INNER PACKAGING | |
Material | Compact cardboard cylinder with an expanded polystyrene layer adapted to its inner wall. | Compact cardboard cylinder with embedded metal bottom. |
Empty weight | 73 g | 35 g |
Plastic cap weight | 25 g | 9 g |
External diameter | 99 mm | 67 mm |
Total height | 170 mm (capless); 172 mm (with cap) | 148 mm (capless); 149 mm (with cap) |
Cobb1800 | 151,4 g/m2 | |
Clasp type | Mobile lid on the upper part of the cylinder, made of rigid plastic and press-fitted to the body of the container, without a seal. | Mobile cover on the upper part of the cylinder, made of rigid plastic and snap-fitted to the cylinder body, without a seal. |
Mandril | Made of compact cardboard with high resistance to compression. |
Primary Containers | The packaging can contain an indeterminate number of primary containers depending on the type of container and size to be used (test tubes, flasks, etc). |
Materials to pack |
The CTM03 Container is indicated for the transport of CATEGORY B Infectious Substances (UN 3373). It complies with the P650 Packing Instructions. |
Other considerations |
BAR CODE: 8435104100189 CEE MARKING: Does not have. It is a logistic and non-sanitary product, therefore it does not require this marking. |
Presentation | The CTM03 Containers are served in cardboard boxes of 50 units / box (minimum order). |
Frequent questions
Sanitary and medical waste that pose a risk to human health and the environment must be disposed of in containers. Our containers help transport sanitary waste in complete safety.
What are the ESDESLA containers like?
The CTM01 and CTM03 Transport Container for Biological Samples is made up, in accordance with the OMS recommendations, of two differentiated containers that are concentrically housed one inside the other.
How many primary containers can it hold?
The packaging can contain an indeterminate number of primary containers depending on the type of container and size to be used (test tubes, flasks, etc.)
What type of closure do they have?
The outer and inner packaging have a mobile lid on the upper part of the cylinder, made of rigid plastic and press-fitted to the body of the container, without a seal.
What presentation do you have?
Containers CTM01 and CTM03 are served in cardboard boxes of 50 units / box (minimum order).
If you want more information, contact us.
Request a budget without obligation.